Please note: Due to the Coronavirus outbreak and following Government instruction, our premises are now closed until further notice. There will be a skeleton staff monitoring emails periodically and they will answer phone calls where possible.
Overview: Stylish double sided backlit freestanding poster unit for outdoor use. Fitted with a toughened glass raising door to each side. The glass doors are unlocked at the bottom with a special security key and easily hinged open assisted by 2 gas cylinders which support the door while you change the poster. The light box unit is fixed to a robust steel framework with aluminium cladding panels that is designed to be bolted to a concrete base.
Overall Dimensions: 1333mm x 1943mm.
Poster Dimensions: 6 Sheet Portrait (1187mm x 1750mm).
Visible Dimensions: 1150mm x 1700mm.
Depth: 196mm deep.
Front panels: 5mm toughened safety glass, with an 80mm RAL 9005 black screen printed border. The glass is attached to the window frame with aluminium strips. If the glass is broken, only these strips and the glass panel itself have to be replaced instead of the complete top frame.
Frame Colour: Powder-coated to any standard RAL colour (with the exception of RAL 9006/9007).
Illumination: High bright white LED border illumination with opal diffusers. LEDs used in this light box have an average expected lifetime of over 50,000 hours.
Base Support: Corrosion free galvanised steel framework with 2 pre-drilled mounting plates for anchoring to concrete base.
Base Cladding: The steel framework is covered with aluminium claddings, powder coated in a RAL colour of choice (with the exception of RAL 9006/9007).
Certification: This product is - CE Certified.
IP Rating: IP66 - Water resistant. Totally protected against dust. Protected against strong jets of water - limited ingress permitted. NB the case is water resistant not waterproof, some condensation may occur, ensure the print used is waterproof.
Packaging: At additional cost (several options available).
Lead Time: Manufactured to order in approx 6-8 weeks.
This product is weather resistant but not waterproof. Due to changes in atmospheric humidity and water vapour in the air, condensation can occur in any poster case or notice board, similar to the inside of a car window, especially when changing the posters. If condensation does occur, simply air out the poster case (when weather is dry) to ensure moisture is evaporated.
Posters should be sealed to prevent prints becoming damaged if they come into contact with moisture or condensation.
When installing this product, ensure you mount to a flat and even surface and take care not to over tighten the fixings as you may distort the back panel and cause damage.
The table below shows the visual, poster and overall sizes for this unit:
Visual size (mm)
Poster size (mm)
Overall size (mm)
Customer Reviews ★★★★★
Ford '...we were delighted with the product and service you offered us.'
You might also be interested in these related products