Overview: Premium outdoor LED light panel illuminated poster case with a sleek clear toughened glass front fascia panel with printed block out borders. The front cover is unlocked at the bottom with a special security key and hinges open easily assisted by 2 gas cylinders which support the door while you change the poster. Fully secure, watertight and robust. Available as single sided for wall mounting or as ground fixed mounted back to back on steel posts (with or without cladding at the base).
Poster Dimensions: A0 Portrait (841mm x 1189mm), 4 Sheet Portrait (1016mm x 1524mm), 6 Sheet Portrait (1750mm x 1187mm), F12 Landscape (2685mm x 1280mm).
Depth: only 57mm deep.
Front panel: 5mm toughened safety glass, with an 80mm screen printed border. Black as standard, other colours available for quantities upon request.
Back Panel: 1mm aluminium sheet, powder coated white on the inside for optimal light reflection.
Lighting panel: 10mm thick LED light panel.
Poster Fixing: Internal snap frame profile at the top of the poster case.
Illumination: High bright white LEDs with an average expected lifetime of over 50,000 hours.
Frame Colour: Black as standard. Powder coated to a standard RAL colour for quantities upon request.
Certification: This product is - CE Certified.
IP Rating: IP66 - Water resistant. Totally protected against dust. Protected against strong jets of water - limited ingress permitted. NB the case is water resistant not waterproof, some condensation may occur, ensure the print used is waterproof.
Lead Time: Manufactured to order in approx 6-8 weeks.
Optional additions (prices on request)
Posts for Freestanding: "L" or "T" shaped steel posts for freestanding with welded foot plates.
Base Cladding: To fill the gap underneath freestanding boxes we can provide a cladding panel painted in the same RAL colour as both boxes and poles between the 2 posts.
This product is weather resistant but not waterproof. Due to changes in atmospheric humidity and water vapour in the air, condensation can occur in any poster case or notice board, similar to the inside of a car window, especially when changing the posters. If condensation does occur, simply air out the poster case (when weather is dry) to ensure moisture is evaporated.
Posters should be sealed to prevent prints becoming damaged if they come into contact with moisture or condensation.
When installing this product, ensure you mount to a flat and even surface and take care not to over tighten the fixings as you may distort the back panel and cause damage.
The specification table below shows the visual, poster and overall sizes for this poster case:
Visual size (mm)
Poster size (mm)
Overall size (mm)
Onyx LED Light Box - Product Video
Customer Reviews ★★★★★
Ford '...we were delighted with the product and service you offered us.'
You might also be interested in these related products